Danfoss FC 300 Series Programming Manual

Also see for VLT AutomationDrive FC 301: Installation guide Operating guide Installation guide Design guide Installation guide

Contents

Danfoss FC 300 Series Programming Manual Manual pdf 24 page image

3.2 Parameters: 0-** Operation and DisplayParameters related to the fundamental functions of theadjustable frequency drive, function of the LCP buttons andconfiguration of the LCP display.3.2.1 0-0* Basic Settings0-01 LanguageOption: Function:Defines the language to be used in thedisplay. The adjustable frequency drivecan be delivered with 4 different languagepackages. English and German areincluded in all packages. English cannotbe erased or manipulated.[0] * English Part of Language packages 1 - 4[1] Deutsch Part of Language packages 1 - 4[2] Francais Part of Language package 1[3] Dansk Part of Language package 1[4] Spanish Part of Language package 1[5] Italiano Part of Language package 1Svenska Part of Language package 1[7] Nederlands Part of Language package 1[10] Chinese Part of Language package 2Suomi Part of Language package 1[22] English US Part of Language package 4Greek Part of Language package 4Bras.port Part of Language package 4Slovenian Part of Language package 3Korean Part of Language package 2Japanese Part of Language package 2Turkish Part of Language package 4Trad.Chinese Part of Language package 2Bulgarian Part of Language package 3Srpski Part of Language package 3Romanian Part of Language package 3Magyar Part of Language package 30-01 LanguageOption: Function:Czech Part of Language package 3Polski Part of Language package 4Russian Part of Language package 3Thai Part of Language package 2Bahasa Indonesia Part of Language package 2[99] Unknown0-02 Motor Speed UnitOption: Function:This parameter cannot be adjusted while the motor isrunning.The display showing depends on settings in 0-02 MotorSpeed Unit and 0-03 Regional Settings. The defaultsetting of 0-02 Motor Speed Unit and 0-03 RegionalSettings depends on which region of the world theadjustable frequency drive is supplied to, but can bere-programmed as required.NOTE!Changing the Motor Speed Unit will reset certainparameters to their initial value. It isrecommended to select the motor speed unitfirst before modifying other parameters.[0] * RPM Selects display of motor speed variables andparameters (i.e. references, feedbacks and limits) interms of motor speed (RPM).[1] * Hz Selects display of motor speed variables andparameters (i.e., references, feedbacks and limits) interms of output frequency to the motor (Hz).0-03 Regional SettingsOption: Function:[0] * Interna-tionalActivates 1-20 Motor Power [kW] for setting themotor power in kW and sets the default value of1-23 Motor Frequency to 50 Hz.[1] US Activates 1-20 Motor Power [kW] for setting themotor power in HP and sets the default value of1-23 Motor Frequency to 60 Hz.This parameter cannot be adjusted while the motor isrunning.Parameter Descriptions FC 300 Programming Guide3-2 MG.33.MA.22 - VLT® is a registered Danfoss trademark3