Danfoss VLT 6002-6011 Installation, Operation And Maintenance Manual

Contents

Danfoss VLT 6002-6011 Installation, Operation And Maintenance Manual Manual pdf 29 page image

29ProgrammingUsing the Extend Menu key, it is possible to access to allthe parameters for the drive.Description of ParametersParameters are grouped by function. The groups are:Operation and Display Parameters 001 through 017Load and Motor Parameters 100 through 117References and Limits Parameters 200 through 228Input and Outputs Parameters 300 through 328Application Functions Parameters 400 through 427Serial Communication Parameters 500 through 566Service Functions Parameters 600 through 631Relay Card Functions Parameters 700 through 711The numbers shown in the square brackets ([ ]) after the parametervalues are used in serial communications to choose the parametervalue from the list. They are not shown on the local control panel whenprogramming the drive locally.Setup ConfigurationThe drive has four setups that can be programmed independently. Theactive setup can be selected in parameter 002, Active Setup. Theactive setup number is shown on the right of line two in the displayunder the word “Setup.”It is also possible to set the drive to Multi-Setup to allow switchingsetups through digital inputs or serial communication.More than one setup can be used. An example would be a changingsetups for day/night or summer/winter operation.Parameter 003, Copying of Setups, enables copying from one setup toanother.By means of parameter 004, LCP Copy, any setup can be transferredfrom one drive to another using the removable local control panel(LCP). First, upload all parameter values to the control panel installedin the drive. Insert this panel into the next drive. Download allparameter values from the control unit to the second drive. Repeat thisprocedure to program additional drives.Operation and DisplayParameters 000 through 017This parameter group deals with the display, control keys and othergeneral functions.001 Language (Language)Value:✭ English (ENGLISH) [0]German (DEUTSCH) [1]French (FRANCAIS) [2]Danish (DANSK) [3]Spanish (ESPA¥OL) [4]Italian (ITALIANO) [5]Swedish (SVENSKA) [6]Dutch (NEDERLANDS) [7]Portuguese (PORTUGUESA) [8]Function:This parameter determines the language to be used on the display.Description of choice:There is a choice of the languages indicated.002 Active Setup (ACTIVE SETUP)Value:Factory Setup (FACTORY SETUP) [0]✭ Setup 1 (SETUP 1) [1]Setup 2 (SETUP 2) [2]Setup 3 (SETUP 3) [3]Setup 4 (SETUP 4) [4]Multi-Setup (MULTI SETUP) [5]Function:This parameter defines the setup number that controls the drive.All parameters can be programmed in four individual parameter setups,Setup 1, Setup 2, Setup 3 and Setup 4.In addition, a pre-programmed read-only setup, called the FactorySetup, exists.Description of choice:Factory Setup contains the parameter values preset at the factory. Thissetup can be used as a data source if the other setups are to bereturned to a known state.Setups 1 through 4 are four individual setups that can be selected asrequired.Multi-Setup is used if remote switching between different setups isrequired. Terminals 16, 17, 29, 32, 33 and the serial communicationport can be used for switching between setups.✭ Indicates default parameter. Depending upon the application, the drive may be delivered with other parameters selected.