5 How to operate the adjustable frequency drive5.1.1 Ways of OperationThe adjustable frequency drive can be operated in 3 ways:1. Graphical Local Control Panel (GLCP), see 6.1.22. Numeric Local Control Panel (NLCP), see 6.1.33. RS-485 serial communication or USB, both for PC connection, see 6.1.4If the adjustable frequency drive is equipped with the serial communication option, please refer to the relevant documen-tation.5.1.2 How to operate the Graphical LCP(GLCP)The following instructions are valid for the GLCP (LCP 102).The GLCP is divided into four functional groups:1. Graphical display with Status lines.2. Menu keys and LEDs - selecting mode, changingparameters and switching between displayfunctions.3. Navigation keys and LEDs (LEDs).4. Operation keys and LEDs.Graphical display:The LCD display is back lit with a total of 6 alpha-numericlines. All data is displayed on the LCP, which can show upto five operating variables while in [Status] mode.Display lines:a. Status line: Status messages displaying icons andgraphics.b. Line 1-2: Operator data lines displaying data andvariables defined or chosen by the user. Bypressing the [Status] key, up to one extra line canbe added.c. Status line: Status messages displaying text.The display is divided into 3 sections:Top section (a)shows the status when in status mode, or up to twovariables when not in status mode and in the case of analarm/warning.Autoon ResetHandon OffStatus QuickMenuMainMenuAlarmLogBackCancelInfoOKStatus 1(0)1234rpm 10,4A 43,5HzRun OK43,5HzOnAlarmWarn.130BA018.131234bacThe number of the Active Set-up (selected as the ActiveSet-up in par. 0-10) is shown. When programming inanother set-up than the Active Set-up, the number of theset-up being programmed appears to the right in brackets.How to operate the adjustab... VLT AQUA 12-Pulse High Power Instruction ManualMG.20.Y1.22 - VLT® is a registered Danfoss trademark 5-15 5