Par.No. #Parameter description Default value 4-set-up Change dur-ing operationConver-sion indexType15-6* Option Ident15-60 Option Mounted 0 N/A All set-ups FALSE 0VisStr[30]15-61 Option SW Version 0 N/A All set-ups FALSE 0VisStr[20]15-62 Option Ordering No 0 N/A All set-ups FALSE 0VisStr[8]15-63 Option Serial No 0 N/A All set-ups FALSE 0VisStr[18]15-70 Option in Slot A 0 N/A All set-ups FALSE 0VisStr[30]15-71 Slot A Option SW Version 0 N/A All set-ups FALSE 0VisStr[20]15-72 Option in Slot B 0 N/A All set-ups FALSE 0VisStr[30]15-73 Slot B Option SW Version 0 N/A All set-ups FALSE 0VisStr[20]15-74 Option in Slot C0 0 N/A All set-ups FALSE 0VisStr[30]15-75 Slot C0 Option SW Version 0 N/A All set-ups FALSE 0VisStr[20]15-76 Option in Slot C1 0 N/A All set-ups FALSE 0VisStr[30]15-77 Slot C1 Option SW Version 0 N/A All set-ups FALSE 0VisStr[20]15-9* Parameter Info15-92 Defined Parameters 0 N/A All set-ups FALSE 0 Uint1615-93 Modified Parameters 0 N/A All set-ups FALSE 0 Uint1615-98 Drive Identification 0 N/A All set-ups FALSE 0VisStr[40]15-99 Parameter Metadata 0 N/A All set-ups FALSE 0 Uint166.4.15 Data Readouts 16-**Par.No. #Parameter description Default value 4-set-up Change dur-ing operationConver-sion indexType16-0* General Status16-00 Control Word 0 N/A All set-ups TRUE 0 V216-01 Reference [Unit] 0.000 ReferenceFeedbackUnit All set-ups TRUE -3 Int3216-02 Reference [%] 0.0 % All set-ups TRUE -1 Int1616-03 Status Word 0 N/A All set-ups TRUE 0 V216-05 Main Actual Value [%] 0.00 % All set-ups TRUE -2 N216-09 Custom Readout 0.00 CustomReadoutUnit All set-ups TRUE -2 Int3216-1* Motor Status16-10 Power [kW] 0.00 kW All set-ups TRUE 1 Int3216-11 Power [hp] 0.00 hp All set-ups TRUE -2 Int3216-12 Motor Voltage 0.0 V All set-ups TRUE -1 Uint1616-13 Frequency 0.0 Hz All set-ups TRUE -1 Uint1616-14 Motor Current 0.00 A All set-ups TRUE -2 Int3216-15 Frequency [%] 0.00 % All set-ups TRUE -2 N216-16 Torque [Nm] 0.0 Nm All set-ups TRUE -1 Int3216-17 Speed [RPM] 0 RPM All set-ups TRUE 67 Int3216-18 Motor Thermal 0 % All set-ups TRUE 0 Uint816-22 Torque [%] 0 % All set-ups TRUE 0 Int1616-3* Drive Status16-30 DC Link Voltage 0 V All set-ups TRUE 0 Uint1616-32 Brake Energy /s 0.000 kW All set-ups TRUE 0 Uint3216-33 Brake Energy /2 min 0.000 kW All set-ups TRUE 0 Uint3216-34 Heatsink Temp. 0 °C All set-ups TRUE 100 Uint816-35 Inverter Thermal 0 % All set-ups TRUE 0 Uint816-36 Inv. Nom. Current SR All set-ups TRUE -2 Uint3216-37 Inv. Max. Current SR All set-ups TRUE -2 Uint3216-38 SL Controller State 0 N/A All set-ups TRUE 0 Uint816-39 Control Card Temp. 0 °C All set-ups TRUE 100 Uint816-40 Logging Buffer Full [0] No All set-ups TRUE - Uint816-5* Ref. & Feedb.16-50 External Reference 0.0 N/A All set-ups TRUE -1 Int1616-52 Feedback [Unit] 0.000 ProcessCtrlUnit All set-ups TRUE -3 Int3216-53 Digi Pot Reference 0.00 N/A All set-ups TRUE -2 Int1616-54 Feedback 1 [Unit] 0.000 ProcessCtrlUnit All set-ups TRUE -3 Int3216-55 Feedback 2 [Unit] 0.000 ProcessCtrlUnit All set-ups TRUE -3 Int3216-56 Feedback 3 [Unit] 0.000 ProcessCtrlUnit All set-ups TRUE -3 Int3216-58 PID Output [%] 0.0 % All set-ups TRUE -1 Int1616-59 Adjusted Setpoint 0.000 ProcessCtrlUnit All set-ups TRUE -3 Int32VLT AQUA Low Harmonic Drive Operating In-structions 6 How to Programme the Low Harmonic DriveMG.20.T1.02 - VLT® is a registered Danfoss trademark 1356