Danfoss VLT Aqua Drive FC 202 Operating Instructions Manual

Also see for VLT AQUA Drive FC 202: Service guide Installation guide Installation guide Operating guide Installation guide

7.1.7. Changing a Text ValueIf the selected parameter is a text value,change the text value by means of the up/down navigation keys.The up key increases the value, and the downkey decreases the value. Place the cursor onthe value to be saved and press [OK].130BP068.10Illustration 7.11: Display example.7.1.8. Changing a Group of Numeric Data ValuesIf the chosen parameter represents a numericdata value, change the chosen data value bymeans of the <> navigation keys as well asthe up/down navigation keys. Use the <>navigation keys to move the cursor horizon-tally.130BP069.10Illustration 7.12: Display example.Use the up/down navigation keys to changethe data value. The up key enlarges the datavalue, and the down key reduces the data val-ue. Place the cursor on the value to be savedand press [OK].130BP070.10Illustration 7.13: Display example.7.1.9. Changing of Data Value,Step-by-StepCertain parameters can be changed step by step or infinitely variably. This applies toMotor Pow-er (par. 1-20),Motor Voltage (par. 1-22) andMotor Frequency (par. 1-23).The parameters are changed both as a group of numeric data values and as numeric data valuesinfinitely variably.7.1.10. Read-out and Programming of Indexed ParametersParameters are indexed when placed in a rolling stack.Par. 15-30 to 15-32 contain a fault log which can be read out. Choose a parameter, press [OK],and use the up/down navigation keys to scroll through the value log.Use par. 3-10 as another example:Choose the parameter, press [OK], and use the up/down navigation keys keys to scroll throughthe indexed values. To change the parameter value, select the indexed value and press [OK].Change the value by using the up/down keys. Press [OK] to accept the new setting. Press [Cancel]to abort. Press [Back] to leave the parameter.VLT ® AQUA DriveOperating Instructions 7. How to programme the frequency converterMG.20.M2.02 - VLT ® is a registered Danfoss trademark 837