Par. No. # Parameter description Default value 4-set-up Change during opera-tionConver-sion indexType3-0* Reference Limits3-02 Minimum Reference SR All set-ups TRUE -3 Int323-03 Maximum Reference SR All set-ups TRUE -3 Int323-04 Reference Function [0] Sum All set-ups TRUE - Uint83-1* References3-10 Preset Reference 0.00 % All set-ups TRUE -2 Int163-11 Jog Speed [Hz] SR All set-ups TRUE -1 Uint163-13 Reference Site [0] Linked to Hand / Auto All set-ups TRUE - Uint83-14 Preset Relative Reference 0.00 % All set-ups TRUE -2 Int323-15 Reference 1 Source [1] Analog input 53 All set-ups TRUE - Uint83-16 Reference 2 Source [0] No function All set-ups TRUE - Uint83-17 Reference 3 Source [0] No function All set-ups TRUE - Uint83-19 Jog Speed [RPM] SR All set-ups TRUE 67 Uint163-4* Ramp 13-41 Ramp 1 Ramp Up Time SR All set-ups TRUE -2 Uint323-42 Ramp 1 Ramp Down Time SR All set-ups TRUE -2 Uint323-5* Ramp 23-51 Ramp 2 Ramp Up Time SR All set-ups TRUE -2 Uint323-52 Ramp 2 Ramp Down Time SR All set-ups TRUE -2 Uint323-8* Other Ramps3-80 Jog Ramp Time SR All set-ups TRUE -2 Uint323-81 Quick Stop Ramp Time SR 2 set-ups TRUE -2 Uint323-84 Initial Ramp Time 0(Off) All set-ups TRUE - -3-85 Check Valve Ramp Time 0(Off) All set-ups TRUE - -3-86 Check Valve Ramp End Speed [RPM] Motor Speed Low Limit All set-ups TRUE - -3-87 Check Valve Ramp End Speed [Hz] Motor Speed Low Limit All set-ups TRUE - -3-88 Final Ramp Time 0(Off) All set-ups TRUE - -3-9* Digital Pot.Meter3-90 Step Size 0.10 % All set-ups TRUE -2 Uint163-91 Ramp Time 1.00 s All set-ups TRUE -2 Uint323-92 Power Restore [0] Off All set-ups TRUE - Uint83-93 Maximum Limit 100 % All set-ups TRUE 0 Int163-94 Minimum Limit 0 % All set-ups TRUE 0 Int163-95 Ramp Delay 1.000 N/A All set-ups TRUE -3 TimD7.2.5. 3-** Reference / Ramps7. How to programme the frequency converterVLT ® AQUA DriveOperating Instructions90 MG.20.M2.02 - VLT ® is a registered Danfoss trademark7