Danfoss VLT AutomationDrive FC 301 Programming Manual

Also see for VLT AutomationDrive FC 301: Programming guide Installation guide Operating guide Installation guide Design guide

Contents

Danfoss VLT AutomationDrive FC 301 Programming Manual Manual pdf 21 page image

2.1.10 Changing DataThe procedure for changing data is the same in the Quickmenu and the Main menu mode. Press [OK] to change theselected parameter.The procedure for changing data depends on whether theselected parameter represents a numerical data value or atext value.2.1.11 Changing a Text ValueIf the selected parameter is a text value, change the textvalue with the [▲] [▼] keys.Place the cursor on the value to save and press [OK].130BP068.10740RPM0 -01 Language[0] English10.64 A 1 [1]0-0*Basic SettingsIllustration 2.16 Changing a Text Value2.1.12 ChangingIf the selected parameter represents a numeric data value,change the selected data value by means of the [◀] [▶]navigation keys as well as the [▲] [▼] navigation keys. Press[◀] [▶] keys to move the cursor horizontally.130BP069.101- 6*113 RPM 1.78 A 1(1)Load depen. setting1 - 60 Low speed loadcompensation100%Illustration 2.17 Changing a Data ValuePress [▲] [▼] keys to change the data value. [▲] increasesthe data value, and [▼] decreases the data value. Place thecursor on the value to save and press [OK].130BP070.101 - 60 Low speed loadcompensation1 0%Load depen. setting 1- 6*729RPM 6.21A 1(1)6Illustration 2.18 Saving a Data Value2.1.13 Infinitely Variable Change ofNumeric Data ValueIf the selected parameter represents a numeric data value,select a digit with [◀] [▶].130BP073.10635 RPM1 - 71 Start Delay00.0s0.44 A 1 (1)1- 7*Start AdjustmentsIllustration 2.19 Selecting a DigitChange the selected digit infinitely variably with [▲] [▼].The selected digit is indicated by the cursor. Place thecursor on the digit to save and press [OK].130BP072.10957RPM1-71 High starting torque time0. s11.58A 1 (1)1-7*Start Adjustments4Illustration 2.20 Saving2.1.14 Value, Step-by-StepCertain parameters can be changed step by step orinfinitely varying. This applies to 1-20 Motor Power [kW],1-22 Motor Voltage and 1-23 Motor Frequency.The parameters are changed both as a group of numericdata values and as numeric data values infinitely varying.2.1.15 Read-out and Programming ofIndexed ParametersParameters are indexed when placed in a rolling stack.15-30 Fault Log: Error Code to 15-32 Alarm Log: Time containa fault log which can be read out. Select a parameter,press [OK], and use [▲] [▼] to scroll through the value log.Use 3-10 Preset Reference as another example:How to Programme VLT® AutomationDrive FC 301/302 Programming GuideMG33MH02 - Rev. 2013-09-30 192 2