Danfoss VLT AutomationDrive FC 301 Programming Manual

Also see for VLT AutomationDrive FC 301: Programming guide Installation guide Operating guide Installation guide Design guide

Contents

Danfoss VLT AutomationDrive FC 301 Programming Manual Manual pdf 26 page image

3.2 Parameters: 0-** Operation and DisplayParameters related to the fundamental functions of thefrequency converter, function of the LCP keys and configu-ration of the LCP display.3.2.1 0-0* Basic Settings0-01 LanguageOption: Function:Defines the language to be used in thedisplay. The frequency converter isdelivered with 4 different languagepackages English and German areincluded in all packages. English cannotbe erased or manipulated.[0] English Part of Language packages 1 - 4[1] Deutsch Part of Language packages 1 - 4[2] Francais Part of Language package 1[3] Dansk Part of Language package 1[4] Spanish Part of Language package 1[5] Italiano Part of Language package 1[6] Svenska Part of Language package 1[7] Nederlands Part of Language package 1[10] Chinese Part of Language package 2[20] Suomi Part of Language package 1[22] English US Part of Language package 4[27] Greek Part of Language package 4[28] Bras.port Part of Language package 4[36] Slovenian Part of Language package 3[39] Korean Part of Language package 2[40] Japanese Part of Language package 2[41] Turkish Part of Language package 4[42] Trad.Chinese Part of Language package 2[43] Bulgarian Part of Language package 3[44] Srpski Part of Language package 3[45] Romanian Part of Language package 3[46] Magyar Part of Language package 3[47] Czech Part of Language package 3[48] Polski Part of Language package 4[49] Russian Part of Language package 3[50] Thai Part of Language package 20-01 LanguageOption: Function:[51] BahasaIndonesiaPart of Language package 2[52] Hrvatski Part of Language package 30-02 Motor Speed UnitOption: Function:NOTICEThis parameter cannot be adjustedwhile the motor is running.The display showing depends on settings in 0-02 MotorSpeed Unit and 0-03 Regional Settings. The defaultsetting of 0-02 Motor Speed Unit and 0-03 RegionalSettings depends on which region of the world thefrequency converter is supplied to, but can be re-programmed as required.NOTICEChanging the Motor Speed Unit resets certainparameters to their initial value. It isrecommended to select the motor speed unitfirst, before modifying other parameters.[0] RPM Selects display of motor speed variables andparameters (i.e. references, feedbacks and limits) interms of motor speed (RPM).[1] Hz Selects display of motor speed variables andparameters (i.e. references, feedbacks and limits) interms of output frequency to the motor (Hz).0-03 Regional SettingsOption: Function:NOTICEThis parameter cannot be adjustedwhile the motor is running.[0] * Interna-tionalActivates 1-20 Motor Power [kW] for setting themotor power in kW and sets the default value of1-23 Motor Frequency to 50 Hz.[1] US Activates 1-20 Motor Power [kW] for setting themotor power in hp and sets the default value of1-23 Motor Frequency to 60 Hz.0-04 Operating State at Power-up (Hand)Option: Function:Selects the operating mode upon reconnectionof the frequency converter to mains voltageafter power down in Hand (local) operationmode.[0] Resume Restarts the frequency converter, maintainingthe same and the same start/stop settingsParameter Descriptions VLT® AutomationDrive FC 301/302 Programming Guide24 MG33MH02 - Rev. 2013-09-3033