Change a Password66 DD400 Series Restorer User GuideChange a PasswordTo change a user password, including the password for the sysadmin user, use the user changepassword user-name operation. The operation asks for the new password and then asks youto re-enter the password as a confirmation. Without the user-name component, the commandchanges the password for the current user. The Tab character is not allowed in a password.Available to sysadmin to change any user password and available to all users to change only theirown password.user change password [user-name]For example, to change the password for a user with a login name of jsmith:# user change password jsmithEnter new password:Re-enter new password:Passwords matchedReset to the Default UserTo reset the user list to the one factory default user, sysadmin, use the user reset operation.Available to administrative users only.user resetThe response looks similar to the following, which lists all removed users:# user resetRemoving user jsmithRemoving user bjonesCan not remove user sysadminDisplay Current UsersThe display of users currently logged in to a restorer shows:Name is the user’s login name.Idle is the amount of time logged in with no actions from the user.Login Time is the date and time when the user logged in.Login From shows the address from which the user logged in.tty is the hardware or network port through which the user is logged in or GUI for the users loggedin through the DDR Manager web-based interface.Session is the user session number.
