Installation48 DD400 Series Restorer User Guide6. Check that the LUNs available from the connected array system are correct. Use thedown-arrow key, select Show Configuration, and press Enter. The configuration menu appearswith Show Storage Information selected:System Configuration(Before Installation)1. Show Storage Information2. Show Head Information3. Go to Previous Menu4. Go to Rescue Menu5. Reboot7. Press Enter to display storage information. Each LUN that is available from the array systemappears as a one line entry in the List of SCSI Disks/LUNs. The Valid RAID DiskGroup UUIDList section shows no disk groups until after installation. Use the arrow keys to move up anddown in the display.Storage DetailsSoftware Version: 3.1.0.0-19112Valid RAID DiskGroup UUID List:ID DiskGroup UUID Last Attached Serialno-------------------------------------------------- No diskgroup uuids were found --List of SCSI Disks/LUNs:(Press ctrl+m for disk size information)ID UUID tgt lun loop wwpn comments---------------------------------------------------------------1 No UUID 0 0 0 500601603020e2122 No UUID 0 4 0 500601603020e212Number of Flash disks: 1----------------------------------------Errors Encountered:------------------------------------------ No errors to report8. Press Enter to return to the New Install menu.9. Use the up-arrow key to select Do a New Install.10. Press Enter to start the installation. The system automatically configures the use of all LUNsavailable from the array.
