Clean Operations88 DD400 Series Restorer User GuideDisplay All Clean ParametersTo display all of the settings for the clean operation, use the filesys clean show configoperation.filesys clean show configThe display is similar to the following.:# filesys clean show configThe current cleaning settings are:25 Percent of Space48 Hours0 GB Free (unlimited)50 Percent ThrottleFileystem cleaning is scheduled to run "Tue" at "0600".Display the ScheduleTo display the current date and time for the clean operation, use the filesys clean showschedule operation.filesys clean show scheduleThe display is similar to the following.:# filesys clean show scheduleFilesystem cleaning is scheduled to run “Tue” at “0600”Display the Throttle SettingTo display the throttle setting for cleaning operations, use the filesys clean showthrottle operation.filesys clean show throttleThe display is similar to the following.:# filesys clean show throttle100 Percent ThrottleDisplay the Clean Operation StatusTo display the active/inactive status of the clean operation, use the filesys clean statusoperation. When the clean operation is running, the command displays progress.filesys clean status
