SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 5Ventilation ClearanceVentilation holes are provided for the cooling fans at the bottom and sides of the printer, and atthe back of the laminator. Install the printer and laminator so that the sides are at least 8 inches(200 mm) away from the surrounding wall. Keep the back of the units at least 4 inches (100 mm)away from a wall. Do not place any objects on top of the printer or laminator.Printer OptionsPrinter options installed in the factory are marked on the options label at the back of the printer.Each option installed has a marked or filled square. For example, the following illustration is for aprinter with duplex (double‐sided), bend remedy, and magnetic encoder options.The printer can have one of these factory‐installed smart card reader options: Contact IC Enc/ R/W Duali Contactless Duali Contact/Contactless Gemalto® Contactless Indentive® Dual Contact/Contactless