DataCard SR200 Installation Manual
Also see for LM200: User guideUser guide
                                                                                              | |
Contents
| 
SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 1Chapter 1: Planning theInstallationThis chapter provides information about this User’s Guide. It alsocontains information to help plan the installation of SR200 & SR300 cardprinters and optional LM200 & LM300 laminators.About This ManualThis manual provides detailed instructions for installng the SR200 & SR300 card printers and theoptional LM200 & LM300 card laminators. Chapter 1: "Planning the Installation”—Provides information about this manual, as well asbackground information needed to plan for printer and laminator installation. Chapter 2: "Installing the Hardware Components”—Provides instructions for unpacking andinstalling the hardware components, cables, and power cords of the printer and laminator. Chapter 3: "Installing the Smart Card Driver”—Contains procedures for installing theappropriate smart card driver. This is necessary only if the card printer is equipped with anoptional smart card upgrade. Chapter 4: "Installing the USB Printer Driver”—Provides instructions for installing the USBprinter driver onto the PC(s) used to create and print cards. Chapter 5: "Installing the Status Monitor”—Provides instructions for installing the StatusMonitor onto the PC(s) used to create and print cards. Chapter 6: "Network Installation”—Describes how to install the network printer driver, howto configure the printer for use on a local network, and how to share a networked printer. Chapter 7: "Removing Printer Driver and Status Monitor”—Provides instructions foruninstalling the printer driver or Status Monitor from the PC. Instructions are included forupdating the printer driver if a new version is released.Related DocumentationRefer to the Datacard SR200 & SR300 Card Printers and LM200 & LM300 Laminators User’s Guidefor information about using the printer and laminator to create cards.Refer to the Datacard SR200 & SR300 Plug‐in User’s Guide for information about using the cardprinter with Datacard ID software applications. The manual includes instructions for creatingmagnetic stripe encoding configurations. |
Related manuals for DataCard LM200
manualsdatabase
Your AI-powered manual search engine