10The temperature set is shown on the electronic program display and can be var-ied, with 5 °F (5 °C) intervals, by means of the temperature knob (potentiome-ter) or the program keys.During cooking the oven temperature (°F or °C) is measured by a sensor insidethe cavity and is shown on the program display until set temperature is reached.If set temperature is less than inside oven temperature, the display shows theset temperature.1. SELECTING THE COOKING FUNCTIONTurn the selector knob to the cooking function requiredThe pre-set temperature appears on the program display. °F or °C flasheson the display for 3 seconds. The heating elements start cooking immedi-ately.2. SETTING THE COOKING TEMPERATURETurn the potentiometer knob clockwise to increase the temperature oranticlockwise to reduce it.The maximum temperature which can be set is 480 °F (250 °C) while theminimum temperature is 120 °F (50 °C).or use the program keys in the following way:The temperature can be changed when °F or °C is flashing on the display.2a. If °F or °C is not flashing press key 4 of the program.2b Press key 6 to increase the temperature or key 5 to reduce it.The maximum temperature which can be set is 480 °F (250 °C) while theminimum temperature is 120 °F (50 °C).Note: When °F or °C becomes steady the value shown on the display indicatesthe oven cavity temperature until set temperature is reached. If set temperatureis less than inside oven temperature, the display shows the set temperature.Caution: If a temperature below the minimum value (120 °F or 50 °C) is set thesystem switches off automatically and OFF appears.In this case repeat the procedure from point 2.3. SWITCHING OFFTurn the selector knob to position OFF (oven OFF). The program displayshows the time.SETTING THE COOKING (ONLY FOR THE COOKING FUNCTIONS)➀➁or➁➂AUTOFunctionselector knob Programmer TemperatureknobNOTE: The temperature knob (potentiometer) turns to right and left only tosymbols + and -. Forcing the turning could damage the temperature knob.IIIIIIIIIIIII4 5 62a 2b