DeLonghi 24 E Operating Instructions Manual

Contents

24GENERAL INFORMATIONThe oven can be fitted in standard units, minimum width and depth 23" 5/8 (600 mm).Installation requires a compartment as illustrated in figures 5.1 and 5.2.On the lover side, the oven must lay on supports withstanding the oven weight.The oven should then be secured by 4 screws (not supplied) fitted into the holes pro-vided at the sides of the oven (Fig. 5.3). If you open the oven door, you will see somescrew holes. Remember the housing should not be free standing but be secured to thewall and/or adjacent fittings.ABE DLCIFFHGABDECFig. 5.1Fig. 5.2installation to the cabinetRef. inches mmA 24" 609.5B 24" 608.7C 21" 7/8 max 556 maxD 22" 3/64 max 560 maxE 15/16" 24F 22" 3/64 560G 23" 1/32 585H 1" 31/32 50I 23" 17/64 591L 22" 7/16 min 570 minNOTEIt is essential that when installing your oven, adequateair circulation is available within the installation.Inadequate air circulation may greatly impair the per-formance of your oven and may affect adjacent cabi-nets due to an increase in temperature.Adjust the hinges of cabinet door adjacent to the ovento allow a 5 - 7 mm gap between the furniture doorand the oven frame.Fig. 5.3