Dedicated Micros CamVu 720 Series Installation And Configuration Manual
Also see for CamVu 720: Installation and operation manual
                                                                                                                                                                | |
Contents
| 
126 CamVu 720View ControlThe View Control page allows connected video inputs to be displayed full screen or in Quad/Multi waydisplay format.Red Full Show currently selected camera full screen.Green Quad Displays four images on-screen, putting the currentlyselected camera in the top left segment of the four,and will increment all cameras by one if pressed againi.e. if cam 1 is shown top left, cam 2 top right etc. thenthe views will increment to cam 2 top left, cam 3 topright etc.Note: When a camera button is pressed to select a new camera, the new selection will be displayed inthe top left hand corner of the display. The next three connected cameras will be displayed in thefollowing three positions.Yellow Multi By default displays nine images on-screen, puttingthe currently selected camera in the top left segment,followed by the next eight cameras and will incrementall cameras by one if pressed again i.e. if cam 1 isshown top left, cam 2 adjacent etc. then the views willincrement to cam 2 top left, cam 3 adjacent etc.Blue Map Displays either the default camera selection map ora specific site map (if one has been configured) with‘hotspots’ showing camera locations. A camera can beviewed by selecting the corresponding hotspot.Purple Next Opens the next page of the Viewer menu.Note: For information on creating Camera Selection maps. Refer to the Display Setting->Map Config’section for further information. |
Related manuals for Dedicated Micros CamVu 720
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine