Dedicated Micros CamVu 720 Series Installation And Configuration Manual
Also see for CamVu 720: Installation and operation manual
                                                                                                                                                                | |
Contents
| 
76 CamVu 720Live TransThe unit transmits live images using JPEG or MPEG formats.The NetVu ObserVer remote viewing software will use the settings configured on this page as the defaultsfor JPEG & MPEG; High, Medium and Low settings.Filter by This will filter the camera category being edited. The resolutionsavailable for selection will depend on the connected camera type (i.e.Standard or Megapixel Resolution) and whether Turbo Mode hasbeen activated via the Profile Record menu (Record Settings->ProfileRecord).Note: The Megapixel Resolution option will only be available if a megapixel camera is connected.IMPORTANT: There are three classifications of IP camera:1. Standard Resolution - QCIF,CIF,2CIF,4CIF2. Standard Resolution (VGA) - VGA,SVGA,QVGA,Q2VGA3. Megapixel - VGA,SVGA,UXGA,QVGA,Q2VGA,XGA,XGA+,SXGA+,QXGAThe classification of each connected camera channel can be viewed via the CamConfig menu (SystemSettings->Status->About->CamConfig).High LAN/Medium WAN/Low VLBR This shows the transmission settings configured for a High qualityLAN (Local Area Network) connection, Medium quality WAN (WideArea Network) connection or a Low quality VLBR (Very Low Bit Rateconnection). |
Related manuals for Dedicated Micros CamVu 720
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine