150 CamVu 720NETVU OBSERVER - SEAMLESS VIDEO MANAGEMENTDedicated Micros NetVu ObserVer video management software allows seamless viewing and control of live and recorded images from any NetVuConnected product (IP or analogue) in a single interface. The ability to view multiple sites simultaneously makes management of any securityinstallation efficient. The inclusion of RVRC (ARC) features such as EDP, event characterisation and report generation make NetVu ObserVerideal for remote monitoring of multiple sites. (Supplied with Product, Apple Mac Version Available)ALARMS & RELAYSVideo Motion Detection (VMD) & Activity Detection, Zoned alarms based on multiple inputs.On alarm actions include; Alarm Reporting, Record Profile change, Email, Relay Closure (Relay closure on models with relay outputs only)CMVUVRD720: 2 physical alarm inputs & 1 physical relay output.AUDIOCMVUVRD720: 1x audio input (mono) – 3.5mm jack, 47kΩinput impedance, 1x audio ouput (mono) – 3.5mm jack, 47kΩinput impedanceGENERAL SPECIFICATIONSENCLOSURECMVU720: Zintec case, Cast Zinc lens mount, V0 ABS trimCMVUD720: Grey ABS. Clear polycarbonate bubbleCMVUVRD720: IP66 Die cast aluminium LM25 Base, Lexan Polycarbonate BubbleCONNECTIONSEthernet: 10/100 BaseT RJ45 Connector PoEStorage: Micro SD slot for recording. Supplied with 2GB class 4 card. CMVU720: Secondary Micro SD slot for recordingPower: Terminal BlockCMVUVRD720: Terminal Block for Alarms & RelaysMOUNTING OPTIONSCMVU720: 1/4” 20 UNC mounts on top and bottomCMVUD720: Ceiling, Surface (via provided fixings), 3-axis GyroView set upCMVUVRD720: Surface (via provided fixings), 3-axis GyroView set upMEASUREMENTSCMVU720: 123 (L) x 60 (H) x 60 (W) (mm)CMVUD720: 120 (L) x 120 (W) x 110 (H) (mm)CMVUVRD720: 148 (L) x 148 (W) x 104 (H) (mm)WEIGHTCMVU720: 0.4kg (14oz) without lens CMVUD720: 0.3kg (10.5oz) CMVUVRD720: 1.18kg (41.6oz)POWERCMVU720: 12Vdc-24Vac/PoE, Consumption: 4.5W CMVUD720: PoE only, Consumption: 4.5W CMVUVRD720: 12Vdc/PoE, Consumption: 4.5WPOWER OVER ETHERNETIEEE 802.3-2008. End span and bridging injectors supported.Supplied with a PoE injector to allow power to be applied to the connecting Ethernet cable without the need for a PoE enabled network switch.This allows 48V power (supplied seperately) to be provided down the line to the camera on the same cable that is used for data transmission.9502ENVIRONMENTALOperating Temperature: -10º to +50ºC (14º to 122ºF)Operating Humidity: 20% to 80% relative humidity, non condensingStorage Temperature: -10º to +70ºC (14º to 158ºF)Storage Humidity: 20% to 90% relative humidity, non condensing