Dedicated Micros CamVu 720 Series Installation And Configuration Manual
Also see for CamVu 720: Installation and operation manual
                                                                                                                                                                | |
Contents
| 
6 CamVu 720Important SafeguardsRead InstructionsAll the safety and operating instructions should be read before the unit is operated and adhered to duringoperation. These instructions should be retained with the unit, and all warnings and cautions containedshould be heeded.Power SourcesThis unit should be operated only from the type of power source indicated on the manufacturer’s label.Power Over EthernetThis product supports POE and when connected to a suitable switch, will not require an external PSU todrive the device (Bridge and end-span compatible).Servicing and RepairDo not attempt to service this unit yourself as opening or removing covers may expose you to dangerousvoltage or other hazards.Refer all servicing and repair to qualified service personnel.EquipmentUse only attachments/accessories specified by the manufacturer.VentilationEnsure unit is properly ventilated to protect from overheating.Camera CareIn order to avoid damaging your camera, note the following points:CAUTION• The camera has threaded mounting points on the top and bottom of the case. Only use astandard, photographic mounting bolt with a 1/4-20 UNC thread.• Before fitting the lens, make sure that its back will not touch the CMOS sensor or associatedcomponents when screwed fully home.• Do not touch the image surface of the sensor. If the sensor is accidentally touched, onlyclean it using isopropanol.• Do not expose the camera sensor to very bright light over a long period of time as thismay cause damage to the sensor. The camera and lens set-up must be correct to avoidpossible damage due to long term exposure to bright light. A lens with an automatic iris isrecommended under these conditions.CE NOTICE (EUROPEAN UNION)This section contains the regulatory declarations for the EU for the Unit Camera.This product is marked with the CE symbol and indicates compliance with all applicable Directives. A“Declaration of Conformity” is held at Dedicated Micros Ltd, 1200 Daresbury Park, Daresbury, CheshireWA4 4HS www.dedicatedmicros.com |
Related manuals for Dedicated Micros CamVu 720
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine