Dedicated Micros CamVu 720 Series Installation And Configuration Manual
Also see for CamVu 720: Installation and operation manual
                                                                                                                                                                | |
Contents
| 
29 Installation GuideSystem Features NetworkSecondary Web Port If the default port setting for web serving has already been allocated,it is possible to configure a second port number i.e. the secondary webport can be set to 8000 if the default web port (80) is blocked by thenetwork or firewall.Use Record Profiles for Tx High This option sets the Video Transmission profile for the ‘High’ settingto be identical to the settings (rate/quality/resolution) that are beingrecorded.Auto IP Override This is defaulted to allow zero configuration at the factory. SelectDisable to prevent Zero Config address negotiation.Max Client Connections This setting limits the number of client connections to the server.The default value is 256 but could be increased if there is heavynetwork traffic.ARP Cache Size This setting limits the number of cache entries available in the ARPtable. The default setting of 256 is adequate for most instancesTCP Reassembly Queue Limit This setting limits the maximum number of TCP segments allowed inthe reassembly queue, to protect against a common DoS attack.Remote Codec Default Connection This selects the initial connection type to use for an auto configuredremote codec camera, select from TCP or UDPSystem (Red) Select to open the System->Features->System pageNetwork (Green) Select to open the System->Features->Network pageVideo (Yellow) Select to open the System->Features->Video pageOther (Blue) Select to open the System->Features->Other page |
Related manuals for Dedicated Micros CamVu 720
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine