Dedicated Micros DM18X Instruction Manual

Dedicated Micros DM18X Instruction Manual Manual pdf 12 page image

62.5 Setting Dome Camera ProtocolIf a dome camera is to be installed with a Dedicated Micros KBS3 keyboard, select the switch asthe same as the Dedicated Micros DVR.Consult service personnel if a dome camera is installed with device other than a keyboardcontroller.S/W On Off F UNCTIOND1 S4-1 Enable Disable AlarmD2 S4-2 PAL NTSC NTSC/PALD3 S4-3 ENDLESS Pan modeD4 S4-4 RS-422 RS-485 RS-422/RS-485D5 D6 D7S5-1 S5-2 S5-3 PROTOCOLOff Off Off F2,F2E,P,D,E & Ph Protocol(Default)Off Off On ReservedOff On Off S 422Off On On ReservedOn Off Off V ProtocolOn Off On ReservedOn On Off D ColorOn On On ReservedD8 D9 D10S5-4 S6-1 S6-2 B AUD R ATEOff Off Off 2400 bpsOff Off On 4800 bpsOff On Off 9600 bps (Default)Off On On 19200 bpsOn Off Off 38400 bpsOn Off On 57600 bpsOn On Off 115200 bpsOn On On 230400 bpsD11 D12S6-3 S6-4 C AMERAOff Off Default cameras (Default)Off On ReservedOn Off ReservedOn On ReservedDedicated Micros DVRDefaults(9600bps)D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12ON ONOFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFFFigure 6 – Protocol Selection SwitchesCameraProtocolAlarm1 2 3 4S6S5S4Baud rateNTSC/PALRS-4851 2 3 4 1 2 3 4RS-422/D1 D2 D3 D4 D5 D6 D7 D8 D9 D12D10 D11NTSC PALononS4 S4Note: When you use thePelco-P protocol with 4800bpsin the DVR, you shouldchange the baud rate to 4800bps of the dome.