Dedicated Micros DM18X Instruction Manual

Dedicated Micros DM18X Instruction Manual Manual pdf 20 page image

144. To add a stored preset as a Tour, twist the Zoom handle or press Zoom Key (Programmedpreset will scroll). To remove a stored preset from the Tour, press PRESET + 91 keys,blank position mark (===) will be displayed. You can overwrite the programmed position.5. To place functions other than preset, press Tour(PRESET + 70), Pattern(PRESET + 80),or Scan(PRESET + 60 ) for Tour, Pattern or Auto Scan respectively.6. Repeat Step 2 through 5 for each desired position. Each title will be displayed on top of theline.7. Up to 36 Presets, Tours, Patterns Scans can be selected for a Tour. You can expand theTour sequence by calling other programmed tours. Push the Joystick handle to right or leftwhile the cursor is on the top of the line (TOUR 01) to select another page of the Tour menu.(TOUR 01)8. You can enter a title for the selected Tour by twisting the Joystick while the cursor is onthe top of the line (TOUR 01). Rotate the handle clockwise or counterclockwise to scrollthrough the alphanumeric characters. Push the handle to the right or left to select the nextor previous digit.9. Select Save and Exit by pushing the Joystick to the right. Press PRESET + 96 to exit theprogram without saving.NOTE: Press PRESET + 91 key at a programmed position to delete programmed function.In the Tour mode, in conjunction with preset and Auto Scan, you can make the cameratravel from a preset position to another preset position at a specific speed.Example: Preset 001>002>003>004>005>006, Auto Scan 01 starts at preset 002, ends atpreset 003, Auto Scan 02 starts at preset 005, ends at preset 006; Tour01: 001, 002, A01, 004,A02.1 Î 2 2~3 Î 4 Î 5~6, repeatwhere Î : Quick move, ~ : Programmed speed3.7 PatternThe Pattern feature records user control of the selected dome camera for up to 240 seconds. Upto four 4 patterns can be stored and played back by pressing PRESET + 81 ~ 84 keyssubsequently. Alternatively, the PATROL + 3 digits (001-004) can also be pressed on thekeyboard of the DS2 model.Follow steps below to program the Pattern:PATTERN SETUPNO. TITLE SEC01 : xxxxxxxxxxxxxxxx 00002 : xxxxxxxxxxxxxxxx 04103 : xxxxxxxxxxxxxxxx 01004 : xxxxxxxxxxxxxxxx 020TOTAL 071SAVE AND EXIT(ESC TO CANCEL)HOLD DOWN CTRL KEYWHILE RECORDING.