Defender SN502-4CH Instruction Manual

Also see for SN502-4CH: Instruction manual Quick start guide

Contents

Defender SN502-4CH Instruction Manual Manual pdf 11 page image

SN502-4CH 8BASIC SETUPTHINGS TO CONSIDER BEFORE INSTALLATION• The camera should be installed between 8 and 13ft above the area to be monitored• Before screwing in the mount for the camera ensure there are no obstructions in the camera’s view• Place cameras in the most strategic places where they can provide detailed, recorded video of every visitor.• Having the camera in the open for people to see can help deter criminals• To cover large, dark areas such as backyards, garages, and driveways, place cameras in strategic locations,such as on the roof or deck, this way, less cameras are needed to cover an area• Ensure that the sunshade is positioned to avoid glare and be sure to position camera away from directsunlight or other light sources• For best results, the light in front of the camera should be about the same brightness as the light around thearea or object being monitored• Decide whether the camera will be wall-mounted, ceiling mounted or sit on a desk/table top. If you aremounting the camera on a wall or ceiling, use the included mounting hardware. We recommend that themounting bracket is secured using the included screws for all installations• Each camera comes with 60ft of video/power wire please make sure that you mount the cameras no morethan 60ft from the DVR. If longer wiring distance is required, 60ft extensions can be purchased (DF10W) fromyour local re-seller or at www.defender-usa.com• We recommend using a surge protected power bar to protect the camera’s internal circuitry• Please note that the cameras are weather resistant, not weather proof so try to place cameras out of the wayof direct rain or direct snowMOUNTING THE CAMERAS1. Decide if the camera will be wall-mounted or sit on adesk/tabletop. The camera can be adjusted for eithermounting scenario by rotating it to therequired position.2. Screw the mounting bracket into the camera’smounting hole, turning it clockwise.3. Mount the camera in the desired location no morethan 60 ft from the DVR unless you have purchasedadditional wiring. You may mount the cameras on awall, ceiling or desk.4. Ensure that the cameras are strongly secured intothe wall.5. Adjust cameras to the desired viewing angles.6. For additional help on mounting the cameras, pleasesee the drilling template, located at the back ofthe manual.Adjust camera to desired viewing angleEnsure the camera is secured into place