Defender SN502-4CH Instruction Manual

Also see for SN502-4CH: Instruction manual Quick start guide

Contents

Defender SN502-4CH Instruction Manual Manual pdf 17 page image

SN502-4CH 14SHORTCUT MENUStart Record• Selecting this shortcut prompts the DVR to begin recording (if it is not already recording). This will overrideany schedule that is setStop Record• Selecting this shortcut prompts the DVR to stop the manual recordingStart Cruise• Selecting this option prompts the PTZ cruise to start (if you have set up the PTZ cruise). Selecting it againwill stop the PTZ cruiseStart Auto Seq• Selecting this option prompts the cameras to begin sequencing through each camera and then to quadscreen. This function will only work if at least one camera is connected to the device. See Auto Seq setup onPg. 18 for more informationTo start auto sequence:1. Right click the mouse and select “Start Auto Seq”, the cameras will then start sequencing through.2. To stop auto sequence, double click the screen and you will return to the quad view screen.PIP ModePIP stands for picture in picture. This mode allows you to view camera one in full screen and up to two camerachannels (of your choice) as smaller screens in either corner of the screen. You must have at least two camerasconnected to your DVR for PIP mode to function properly.To turn on PIP mode:1. Right click the mouse and scroll to “PIP mode”, once highlighted, twooptions will appear, 1x1 and 1x2.2. 1x1 allows you to view camera one in full screen and another camera inthe lower left corner of the screen. 1x2 allows you to view camera one infull screen and two other cameras in the bottom left and right corners ofthe screen.3. For both options, clicking on the small camera screen will change thecamera that you are viewing.4. To exit PIP mode, right click the mouse.PIP Mode 1x1 PIP Mode 1x2