Defender SN502-4CH Instruction Manual

Also see for SN502-4CH: Instruction manual Quick start guide

Contents

Defender SN502-4CH Instruction Manual Manual pdf 66 page image

SN502-4CH 63TO VIEW DVR THROUGH HOST NAME1. Ensure that all your DYNDNS account information is entered into your DVR’s DDNS setup screen.2. Open Internet Explorer and type in your DVR’s host name that you created on your DYNDNS account.3. You will be prompted for a Password.Default Password: 1234564. Click OK and the DVR software and footage will appear.Note: If using a port other than 80, the port must be specified after your host nameLOGGING INTO SOFTWAREIf you created a DYNDNS account, type in your account’s host name in Internet Explorer. If you didn’t create an accountyou can use your external IP address in Internet Explorer (if on a different computer) or your DVR’s internal IP addressin Internet Explorer (if on a computer connected to the same router).Before you view the online software you are asked to login with a password, you can use the admin or user passwordand the footage will appear.The login screen also has the option to adjust which connection you are viewing the software with (internet or LAN).Leave this option set to Internet.Default Password:123456Once the password is inserted, select login and the DVR software and footage will appear.NETWORK GUIDE