Understanding the Tool Box Menus 207Adjust AltitudePurpose:To specify the altitude of the location where the printer is installed.The discharge phenomenon for charging the photo conductor varies withbarometric pressure. Adjustments are performed by specifying the altitude ofthe location where the printer is being used.NOTE: An incorrect altitude adjustment setting leads to poor printing quality,incorrect indication of remaining toner.Values:Reset DefaultsPurpose:To initialize NVM (non-volatile memory) for system parameters. Afterexecuting this function and rebooting the printer, all the menu parameters,except the parameters for the network, are reset to their default values.For details, see "Resetting Defaults" on page 212.Values:*1 This item is available only when Auto Registration Adjustment is set to Off.*2 The color registration chart prints a lattice pattern of yellow, magenta, and cyanlines. On the chart, find the values on the right side that are next to the line that isperfectly straight for each of the three colors. If the value for this line is 0, colorregistration is not needed. If the value for this line is any value other than 0, specifythe adjustment values under Registration Adjustments.0 meter* Specifies the altitude of the location where the printeris installed.1000 meters2000 meters3000 metersApply New Settings After you complete the settings, press the Apply NewSettings button to apply the changes.Restart printer to apply newsettingsPress the Restart printer to apply new settings buttonto apply the changes.Downloaded from ManualsPrinter.com Manuals
