Understanding the Tool Box Menus 209TCP/IP SettingsPurpose:To configure TCP/IP settings.Values:Network SettingsPurpose:To display the server settings of the Dell Printer Configuration Web Tool.NOTE: When the printer is connected to the USB port, this setting cannot bedisplayed.Values:Apply New Settings After you complete the settings, press the Apply NewSettings button to apply the changes.Restart printer to apply newsettingsPress the Restart printer to apply new settings buttonto apply the changes.IP AddressModeAutoIP* Automatically sets the IP address.DHCP Uses DHCP to set the IP address.BOOTP Uses BOOTP to set the IP address.RARP Uses RARP to set the IP address.Manually Set Manually sets the IP address.IP Address Manually sets the IP address allocated to the printer.Subnet Mask Manually sets the subnet mask.Gateway Address Manually sets the gateway address.Apply New Settings After you complete the settings, press the Apply NewSettings button to apply the changes.Restart printer to apply newsettingsPress the Restart printer to apply new settings buttonto apply the changes.Print ServerSettingsDisplay Click to display the server settings for the Dell PrinterConfiguration Web Tool.Downloaded from ManualsPrinter.com Manuals
