232 Printing3 Press the button until the desired file is highlighted, and then press thebutton.4 Select printing options as required.NOTE: You can print files scanned and stored using the Scan to USB Memoryfeature. Files saved without using the feature such as files created by usermay not be printed properly.Printing a Report PageBy using the Report/List menu, you can print a various of settings foryour printer including printer settings, panel settings, job history, errorhistory, color test page, protocol monitor, address book, and fax activity. Thissection describes two examples of printing from the Report/List menu.Printing a System Settings PageTo verify detailed printer settings, print a printer settings page.See "Understanding the Printer Menus" on page 359 or "Understanding theTool Box Menus" on page 323 to identify the display and operator panelbuttons if you need help.The Operator Panel1 Press the (Menu) button.2 Press the button until System is highlighted, and then press thebutton.3 Press the button until Report/List is highlighted, and then pressthe button.4 Ensure that System Settings is highlighted, and then press thebutton.The system settings page is printed.5 Confirm the IP address next to IP Address under Wired Network on thesystem settings page.If the IP address is 0.0.0.0, wait for a few minutes to resolve the IPaddress automatically, and then print the system settings page again.If the IP address is not resolved automatically, see "Assigning an IP Address(for IPv4 Mode)" on page 53.
