Faxing 301For details about loading a document, see "Loading an Original Documenton the ADF" on page 296.2 Press the (Fax) button.3 Adjust the document resolution to suit your fax needs. For moreinformation, see "Resolution" on page 298.If you need to change the contrast, see "Lighter/Darker" on page 299.4 Press the button until OnHook is highlighted, and then press thebutton.5 Press the button until On is highlighted, and then press thebutton.6 Enter the fax number of the remote fax machine using the numerickeypad.• If the document is loaded on the ADF, press the (Start) button.• If the document is not loaded on the ADF, press the (Start)button, press the button until the desired setting appears, andthen press the button.NOTE: Press the (Cancel) button and the button to cancel the fax job atany time while sending the fax.Confirming TransmissionsWhen the last page of your document has been sent successfully, the printerbeeps and returns to the standby mode.If something goes wrong while sending your fax, an error message appears onthe display.If you receive an error message, p ress the (Cancel) button to clear themessage and try to send the document again.You can set your printer to print a confirmation report automatically aftereach fax transmission. For more information, see "Printing a Report" onpage 319.
