74 Installing Printer Drivers on Computers Running Windows13 As the driver installation is completed, click Print a test page to print a testpage. To use this printer as the default printer, select the Set as the defaultprinter check box.14 Click Finish.Network Connection SetupNetwork Printer Setup on a Local NetworkFor installing host-based printer driver1 Click Software Installation.2 Select Network Installation, and then click Next.3 Select Local Installation, and then click Next.4 Select the printer you want to install from the printer list, and then clickNext. If the target printer is not displayed on the list, click Refresh torefresh the list or click Add Printer to add a printer to the list manually.You may specify the IP address and port name at this point.If you have installed this printer on the server computer, select I amsetting up this printer on a server check box.NOTE: When using AutoIP, 0.0.0.0 is displayed in the installer. Before you cancontinue, you must enter a valid IP address.NOTE: If you are running any of the following operating systems, a WindowsSecurity Alert is displayed:• Windows Vista• Windows Vista 64-bit Edition• Windows Server 2008• Windows Server 2008 64-bit Edition• Windows Server 2008 R2 64-bit Edition• Windows 7• Windows 7 64-bit EditionTo continue installing the host-based printer driver, click Unblock orAllow access (for Windows Server 2008 R2 and Windows 7).5 Specify the printer settings, and then click Next.
