Removing the drives from the hard-drive cageNOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded BoxPC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box PC,follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the RegulatoryCompliance home page at www.dell.com/regulatory_compliance.CAUTION: Hard drives/solid-state drives are fragile. Exercise care when handling the Solid-state/hard drive.CAUTION: To avoid data loss, do not remove the hard drive/solid-state drive while the Embedded Box PC is in sleep oron state.Topics:• Prerequisites• ProcedurePrerequisitesFollow step 1 to step 6 in “Removing the back cover”.ProcedureNOTE: Embedded Box PC is shipped with hard drive, solid-state drive, or both, depending on the configuration ordered.1. Remove the screws that secure the top drive to the hard-drive cage.2. Slide the top drive out of the hard-drive cage.1. back cover 2. STDF (L5.1), M3x3 screws (4)3. hard-drive cage 4. hard drive/solid-state driveProcedure to remove bottom drive1. Remove the screws that secure the bottom drive to the hard-drive cage.2. Lift and slide the bottom drive out of the hard-drive cage.8Removing the drives from the hard-drive cage 19
