Replacing the WLAN-antenna connectorsNOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded BoxPC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box PC,follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the RegulatoryCompliance home page at www.dell.com/regulatory_compliance.Topics:• Procedure• Post-requisitesProcedure1. Insert the WLAN-antenna connectors into the WLAN-antenna connector slots on the bottom cover.NOTE: Insert the WLAN-antenna connectors based on the color indicated behind the bottom cover.2. Replace the nuts and washers that secure the WLAN-antenna connectors to the bottom cover.3. Route the WLAN-antenna cables through the routing guides on the chassis.4. Connect the WLAN-antenna cables to the WLAN card.The following table provides the antenna-cable color scheme for the WLAN card supported by the Embedded Box PC.Connectors on the WLAN card Antenna-cable colorMain (white triangle) WhiteAuxiliary (black triangle) BlackPost-requisites1. Replace the PCI/PCIe card (if necessary).2. Follow step 2 to step 8 in “Replacing the back cover”.20Replacing the WLAN-antenna connectors 39
