Replacing the CPU boardNOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded BoxPC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box PC,follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the RegulatoryCompliance home page at www.dell.com/regulatory_compliance.Topics:• Procedure• Post-requisitesProcedureNOTE: Ensure that the DIP switch settings are applied correctly in the new CPU board. For more information, see DIPswitch settings.1. Place the CPU board on the CPU-board connector the system board.2. Carefully, press down on the CPU board.3. Align the screw holes on the CPU board with the screw holes on the system board.4. Replace the screws that secure the CPU board to the system board.Post-requisites1. Replace the heat sink.2. Replace the memory module.3. Replace the PCI/PCIe card (if necessary).4. Follow step 2 to step 8 in “Replacing the back cover”.5286 Replacing the CPU board
