Removing the riser cardNOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded BoxPC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box PC,follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the RegulatoryCompliance home page at www.dell.com/regulatory_compliance.Topics:• Prerequisites• ProcedurePrerequisites1. Follow step 1 to step 6 in “Removing the back cover”.2. Remove the PCI/PCIe card (if installed).Procedure1. Remove the screws that secure the riser card to the chassis.2. Lift the riser card off the system board.a. screws (2)b. chassisc. riser card3. Remove the screws that secure the riser card to the riser-card bracket.4. Remove the riser-card bracket from the riser card.4170 Removing the riser card
