Printer SettingsDell 7330 Mono Laser Printer5-5Accessing Load Paper TimeoutWhen your print job is formatted for a type or size of paper that is not loaded in the printer, theprinter’s control panel displays a message requesting you to load the appropriate paper. TheLoad Paper Timeout controls the amount of time the printer waits before printing on anothertype or size of paper.To change the load paper timeout, use either:■ The printer’s control panel■ Embedded Web ServerUsing the Control PanelTo change the load paper timeout:1. Select Printer Setup, and then press the OK button.2. Select Paper Handling Setup, and then press the OK button.3. Select Load Paper Timeout, and then press the OK button.4. Scroll to the desired timeout value. The values (None, 1, 3, 5, or 10 minutes, 1 hour or24 hours) indicate the length of time you want the printer to wait for you to load paperbefore printing. If you select a value of None, the printer does not wait for paper to beinserted and immediately picks paper from the default tray.5. Press the OK button to save the change.Using the Embedded Web ServerTo change the load paper timeout:1. Launch your web browser.2. Enter your printer’s IP address in the browser’s Address field.3. Select Properties.4. Select the General folder on the left navigation panel.5. Select Printer Defaults.6. Scroll to the desired Load Paper Timeout value in Timeout Settings. The values (None,1, 3, 5, or 10 minutes, 1 or 24 hours) indicate the length of time you want the printer towait for you to load paper before printing. If you select a value of None, the printer doesnot wait for paper to be inserted and immediately picks paper from the default tray.7. Click Save Changes at the bottom of the screen.
