UNIX (Linux)Dell 7330 Mono Laser Printer3-23UNIX (Linux)Your printer supports connection to a variety of UNIX platforms through the parallel andnetwork interface. The workstations currently supported by EWS for UNIX/Linux to anetwork-connected printer are:■ Sun Solaris■ HPUX 11.0■ HPUX 11i■ AIX 5.0■ Linux (i86)The following procedures enable you to connect your printer using any of the supportedversions of UNIX or Linux listed above.Quick Install StepsPerform the following procedures to set up the printer and install the appropriate drivers.From the PrinterTo set up the printer:1. Verify that both TCP/IP protocol and the proper connector are enabled.2. On the control panel, select one of these IP address options:■ Allow the printer to set up a DHCP address.■ Enter the IP address manually.3. Print the Configuration page and keep it for reference.
