Operational SafetyDell 7330 Mono Laser Printer1-6Operational SafetyYour printer and supplies were designed and tested to meet strict safety requirements. Theseinclude safety agency examination, approval, and compliance with established environmentalstandards.Your attention to the following safety guidelines helps to ensure the continued, safe operationof your printer.Printer LocationPlace the printer in a dust-free area within a temperature range of 41° F to 90° F (5° C to32° C) and a relative humidity range of 15 percent to 85 percent.Printer ClearancePlace the printer in an area where there is adequate space for ventilation, operation, andservicing. The recommended minimal spacing is:Overhead Clearance■ 30 cm (12 in.) above the printer without the finisher/stacker■ 47 cm (18.5 in.) above the printer with the finisher/stackerTotal Height Requirements■ Printer: 74 cm (29 in.)■ Add 29 cm (11.5 in.) for the 1000-sheet feederOther Clearances■ 20 cm (8 in.) behind the printer■ 46 cm (18 in.) in front of the printer■ 64 cm (25.2 in.) on the left side of the printer■ 64 cm (25.2 in.) on the left side of the printer with 2000-sheet feeder■ 20 cm (8 in.) on the right side of the printer■ 100 cm (39.4 in.) on the right side of the printer with the finisher/stacker
