Area Printer control panel message What to do1 Standard bin [x]‑page jam, clear standardbin. [20y.xx]Remove the jammed paper.2 Rear door [x]‑page jam, open reardoor. [20y.xx]Open the rear door, and then remove the jammed paper.3 Tray 1 [x]‑page jam, remove tray 1 toclear duplex. [23y.xx]Pull tray 1 completely out, then push the front duplex flapdown, and then remove the jammed paper.Note: You may need to open the rear door to clearsome 23y.xx paper jams.4 Tray [x] [x]‑page jam, remove tray[x]. [24y.xx]Pull the indicated tray out, and then remove the jammedpaper.5 Multipurposefeeder[x]‑page jam, clear manualfeeder. [250.xx]Remove all paper from the multipurpose feeder, and thenremove the jammed paper.6 Front door [x]‑page jam, open frontdoor. [20y.xx]Open the front door, then remove the toner cartridge,imaging unit, and jammed paper.[x]‑page jam, open front door. [20y.xx]CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hotcomponent, allow the surface to cool before touching it.1 Press the button on the right side of the printer, and then open the front door.Clearing jams 105
