Loading paper and specialty mediaThe selection and handling of paper and specialty media can affect how reliably documents print. For more information,see “Avoiding jams” on page 103 and “Storing paper” on page 39.Setting the paper size and type1 From the printer control panel, navigate to:> Settings > > Paper Menu > > Paper Size/Type >2 Press the up or down arrow button to select the tray or feeder, and then press .3 Press the up or down arrow button to select the paper size, and then press .4 Press the up or down arrow button to select the paper type, and then press to change the settings.Configuring Universal paper settingsThe Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printermenus.Notes:• The smallest Universal paper size is 6 x 127 mm (3 x 5 inches), and is supported only from the multipurposefeeder.• The largest Universal paper size is 216 x 355.6 mm (8.5 x 14 inches), and is supported from all paper sources.1 From the printer control panel, navigate to:> Settings > > Paper Menu > > Universal Setup > > Units of Measure > > select a unit ofmeasure >2 Select Portrait Width or Portrait Height, and then press .3 Press the left or right arrow button to change the setting, and then press .Using the standard bin and paper stopThe standard bin holds up to 150 sheets of 75‑g/m 2 (20‑lb) paper. It collects prints facedown. The standard bin includesa paper stop that keeps paper from sliding out the front of the bin as it stacks.Loading paper and specialty media 26
