Use ToView Security Mode View the encryption method for the wireless network.AppleTalk menuNote: This menu is available only in printer models connected to a wired network or when an optional network cardis installed.To access the menu, navigate to any of the following:• Network/Ports > Standard Network > Standard Network Setup > AppleTalk• Network/Ports > Network Setup [x] > AppleTalkUse ToActivateYesNoEnable or disable AppleTalk support.Note: Yes is the factory default setting.View Name Show the assigned AppleTalk name.Note: The name can be changed only from the Embedded Web Server.View Address Show the assigned AppleTalk address.Note: The address can be changed only from the Embedded Web Server.Set Zone[list of zones available on the network]Provide a list of AppleTalk zones available on the network.Note: The factory default setting is the default zone for the network. If nodefault zone exists, then the zone marked with an asterisk (*) is the defaultsetting.Standard USB menuUse ToPCL SmartSwitchOnOffSet the printer to automatically switch to PCL emulation when a print job receivedthrough a USB port requires it, regardless of the default printer language.Notes:• On is the factory default setting.• When set to Off, the printer does not examine incoming data. The printer usesPostScript emulation if the PS SmartSwitch is set to On. It uses the defaultprinter language specified in the Setup menu if the PS SmartSwitch is set toOff.PS SmartSwitchOnOffSet the printer to automatically switch to PS emulation when a print job receivedthrough a USB port requires it, regardless of the default printer language.Notes:• On is the factory default setting.• When set to Off, the printer does not examine incoming data. The printer usesPCL emulation if the PCL SmartSwitch is set to On. It uses the default printerlanguage specified in the Setup menu if the PCL SmartSwitch is set to Off.Understanding the printer menus 66
