Dell Dimension C7565 Owner's Manual

Contents

64 Removing and Installing Partsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m 3 Press out the securing clip at each end of the memory module connector.4 Align the notch on the bottom of the module with the crossbar in the connector.NOTICE: To avoid damage to the memory module, press the module straight down into the connectorwhile you apply equal force to each end of the module.5 Insert the module into the connector until the module snaps into position.If you insert the module correctly, the securing clips snap into the cutouts at each end of themodule.securing clips (2)connectormemory connector closest to processornotchmemory modulecutouts (2)crossbarC7565bk1.book Page 64 Wednesday, January 26, 2005 1:37 PM