Removing and Installing Parts 896 If you are installing a new floppy drive rather than replacing a drive, remove the drive-panelinserts (see page 85).7 Check all cable connections, and fold cables out of the way to provide airflow for the fan andcooling vents.8 Replace the drive panel (see page 78).9 Replace the computer cover (see page 99).NOTICE: To connect a network cable, first plug the cable in to the network device and then plug it in tothe computer.10 Connect your computer and devices to their electrical outlets, and turn them on.See the documentation that came with the drive for instructions on installing any softwarerequired for drive operation.11 Enter system setup (see page 105) and select the appropriate Diskette Drive option.12 Verify that your computer works correctly by running the Dell Diagnostics (see page 46).Media Card ReaderFor information on using the Media Card Reader, see "Using a Media Card Reader (Optional)" onpage 19.power cabledata cableC7565bk1.book Page 89 Wednesday, January 26, 2005 1:37 PM
