Table 4. iDRAC Quick Sync 2 indicators and descriptionsiDRAC Quick Sync 2 indicatorcode Condition Corrective actionOff (default state) Indicates that the iDRAC Quick Sync 2feature is turned off. Press the iDRAC QuickSync 2 button to turn on the iDRAC QuickSync 2 feature.If the LED fails to turn on, reseat the left control panelflex cable and check. If the problem persists, see theGetting help section.Solid white Indicates that iDRAC Quick Sync 2 is readyto communicate. Press the iDRAC QuickSync 2 button to turn off.If the LED fails to turn off, restart the system. If theproblem persists, see the Getting help section.Blinks white rapidly Indicates data transfer activity. If the indicator continues to blink indefinitely, see theGetting help section.Blinks white slowly Indicates that firmware update is inprogress.If the indicator continues to blink indefinitely, see theGetting help section.Blinks white five times rapidly andthen turns offIndicates that the iDRAC Quick Sync 2feature is disabled.Check if iDRAC Quick Sync 2 feature is configured tobe disabled by iDRAC. If the problem persists, see theGetting help section. For more information, seeIntegrated Dell Remote Access Controller User'sGuide at Dell.com/idracmanuals or DellOpenManage Server Administrator User’s Guide atDell.com/openmanagemanuals.Solid amber Indicates that the system is in fail-safemode.Restart the system. If the problem persists, see theGetting help section.Blinking amber Indicates that the iDRAC Quick Sync 2hardware is not responding properly.Restart the system. If the problem persists, see theGetting help section.Right control panel viewFigure 7. Right control panelDell EMC PowerEdge R440 overview 11
