Viewing Network SettingsTo view the Network Settings screen, perform the following steps:1 Turn on, or restart your system.2 Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and thenrestart your system and try again.3 On the System Setup Main Menu screen, click System BIOS.4 On the System BIOS screen, click Network Settings.Network Settings screen detailsThe Network Settings screen details are explained as follows:Option DescriptionUEFI PXE Settings Enables or disables the device. When enabled, a UEFI PXE boot option is created for the device.UEFI HTTP Settings Enables or disables the device. When enabled, a UEFI HTTP boot option is created for the device.UEFI iSCSI Settings Enables you to control the configuration of the iSCSI device.Table 37. UEFI iSCSI Settings screen detailsOption DescriptioniSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN format.iSCSI Device1 Enables or disables the iSCSI device. When disabled, aUEFI boot option is created for the iSCSI deviceautomatically. This is set to Disabled by default.iSCSI Device1 Settings Enables you to control the configuration of the iSCSIdevice.UEFI iSCSI SettingsYou can use the iSCSI Settings screen to modify iSCSI device settings. The iSCSI Settings option is available only in the UEFI boot mode.BIOS does not control network settings in the BIOS boot mode. For the BIOS boot mode, the option ROM of the network controllerhandles the network settings.Viewing UEFI iSCSI SettingsTo view the UEFI iSCSI Settings screen, perform the following steps:1 Turn on, or restart your system.2 Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and thenrestart your system and try again.114 Pre-operating system management applications
