Dell EMC PowerEdge R440 Installation And Service Manual

Also see for EMC PowerEdge R440: Installation and service manual Installation and service manual

Contents

NOTE: You must install a filler bracket over an empty expansion card slot to maintain Federal CommunicationsCommission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid inproper cooling and airflow inside the system.Installing expansion card into the expansion card riserPrerequisites1 Follow the safety guidelines listed in Safety instructions.2 If installing a new expansion card, unpack it and prepare the card for installation.NOTE: For instructions, see the documentation accompanying the card.3 When installing a card into low profile or full height X1 riser, open the PCIe card holder latch.Steps1 Pull the expansion card latch.2 If installed, remove the filler bracket.NOTE: Store the filler bracket for future use. Filler brackets must be installed in empty expansion card slots to maintainFederal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of thesystem and aid in proper cooling and airflow inside the system.Figure 60. Removing filler bracket for low profile riserInstalling and removing system components 73