108 | Bare Metal Provisioning (BMP)w w w . d e l l . c o m | s u p p o r t . d e l l . c o m • If there is a mismatch, the system upgrades to the downloaded version and reloads.*********VALID IMAGE***********DOWNLOADED RELEASE HEADER :Release Image Major Version : 8Release Image Minor Version : 3Release Image Main Version : 8Release Image Patch Version : 33FLASH RELEASE HEADER B :Release Image Major Version : 8Release Image Minor Version : 3Release Image Main Version : 8Release Image Patch Version : 2800:04:05: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DOWNLOAD: The FTOS image download issuccessful.Erasing MXL 10/40GbE Switch IO Module Primary Image, please wait.................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................00:09:50: %STKUNsyncing disks... IT0-M:CP %CHMGR-15-RELOAD: User donerequest to reload the chassisrebooting• If there is no version mismatch, the system downloads the configuration file.00:03:27: %STKUNIT0-M:CP %JUMPSTART-5-CFG_APPLY: The downloaded config from dhcpserver is being applied00:03:27: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE: DHCP RELEASE sent on Fo 0/56.00:03:27: %STKUNIT0-M:CP %SYS-5-CONFIG_LOAD: Loading configuration filec If the configuration file is downloaded from the server, any saved start-up configuration file on theflash is ignored. If no configuration file is downloaded from the server, the start-up configurationfile on the flash is loaded as in normal reload.6. When the FTOS image and the configuration file has been downloaded, the IP address is released.7. When the boot image has been downloaded, the DHCP RELEASE is sent00:04:06: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE: DHCP RELEASE sent on Fo 0/56.00:04:06: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Fo 0/56The system is now up and running, and it can be managed as usual.
