518 | Simple Network Management Protocol (SNMP)w w w . d e l l . c o m | s u p p o r t . d e l l . c o m Create a CommunityFor SNMPv1 and SNMPv2, you must create a community to enable the community-based security inFTOS. The management station generates requests to either retrieve or alter the value of a managementobject and is called the SNMP manager. A network element that processes SNMP requests is called anSNMP agent. An SNMP community is a group of SNMP agents and managers that are allowed to interact.Communities are necessary to secure communication between SNMP managers and agents; SNMP agentsdo not respond to requests from management stations that are not part of the community.FTOS enables SNMP automatically when you create an SNMP community and displays Message 1. Youmust specify whether members of the community may only retrieve values (read), or retrieve and altervalues (read-write).To create an SNMP community:View your SNMP configuration, using the command show running-config snmp from EXEC Privilegemode, as shown in Figure 30-1.Figure 30-1. Creating an SNMP CommunitySetting Up User-based Security (SNMPv3)When setting up SNMPv3, you can set users up with one of the following three types of configuration forSNMP read/write operations. Users are typically associated to an SNMP group with permissions provided,such as OID view.• noauth: no password or privacy. Select this option to set a user up with no password or privacyprivileges. This is the basic configuration. Users must have a group and profile that do not requirepassword privileges.• auth: password privileges. Select this option to set up an user with password authentication• priv: password and privacy privileges. Select this option to set up a user with password and privacyprivileges.Task Command Command ModeChoose a name for the community. snmp-server community name {ro | rw} CONFIGURATIONMessage 1 SNMP Enabled22:31:23: %STKUNIT0-M:CP %SNMP-6-SNMP_WARM_START: Agent Initialized - SNMP WARM_START.FTOS(conf)#snmp-server community my-snmp-community ro22:31:23: %STKUNIT0-M:CP %SNMP-6-SNMP_WARM_START: Agent Initialized - SNMP WARM_START.FTOS#do show running-config snmp!snmp-server community mycommunity roFTOS#
