Dell Force10 MXL Deployment Manual
Also see for Force10 MXL 10 GbE: ManualGetting started guideManual
                                                                                         | |
Contents
| 
Deploying FCoE (FIP Snooping) on Dell Force 10 MXL29The following command will show vital information on the DCBX configuration. Type: show interfacesdcbx detail. This command will show more specific detail about the configuration that has beennegotiated between the devices. In this example interface TenGigabitEthernet 0/3 is used as adownlink to a host server and CNA installed in that system. Interface TenGigabitEthernet 0/52 is theuplink into the top-of-rack FCF switch.Some key items in these results will be “true or false” for is configuration source, Local DCBXCompatibility mode is:, and Peer Operating version is:. These results will be important inunderstanding the negotiations happen between the switches and CNA.“show interfaces dcbx detail”Figure 26.MXL-B1-Rack3015# show interfaces dcbx detailE-ETS Configuration TLV enabled e-ETS Configuration TLVdisabledR-ETS Recommendation TLV enabled r-ETS Recommendation TLVdisabledP-PFC Configuration TLV enabled p-PFC Configuration TLVdisabledF-Application priority for FCOE enabled f-Application Priority forFCOE disabledI-Application priority for iSCSI enabled i-Application Priority foriSCSI disabled--------------------------------------------------------------------Interface TenGigabitEthernet 0/3Port Role is Auto-DownstreamDCBX Operational Status is Enabled with ETS MismatchIs Configuration Source? FALSELocal DCBX Compatibility mode is IEEEv2.5Local DCBX Configured mode is AUTOPeer Operating version is IEEEv2.5Local DCBX TLVs Transmitted: ERPFi11 Input PFC TLV pkts, 28 Output PFC TLV pkts, 5 Error PFC pkts1202 PFC Pause Tx pkts, 0 Pause Rx pkts14 Input ETS Conf TLV Pkts, 28 Output ETS Conf TLV Pkts, 7 Error ETS ConfTLV Pkts0 Input ETS Reco TLV pkts, 28 Output ETS Reco TLV pkts, 0 Error ETS RecoTLV PktsInterface TenGigabitEthernet 0/52Remote Mac Address 54:7f:ee:56:55:49Port Role is Auto-UpstreamDCBX Operational Status is EnabledIs Configuration Source? TRUELocal DCBX Compatibility mode is CEELocal DCBX Configured mode is AUTOPeer Operating version is CEELocal DCBX TLVs Transmitted: ErPFi |
Related manuals for Dell Force10 MXL 10 GbE
Dell Force10 MXL Manual
Dell Force10 S55 Manual
Dell Force10 C150 Manual
Dell Force10 Z9000 Manual
Dell Force10 S4810P Manual
Dell Force10 Software Defined Networking Deployment Manual
Dell Force10 S25N Implementation Manual
Dell PowerEdge R730xd Deployment Manual
Dell Force10 S60 Quick Start Manual
Dell Force10 Z9000 Reference Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine