Deploying FCoE (FIP Snooping) on Dell Force 10 MXL31“show interfaces pfc detail”Figure 28.MXL-B1-Rack3015# show interfaces pfc detailInterface TenGigabitEthernet 0/3Admin mode is onAdmin is enabledRemote is enabled, Priority list is 3Remote Willing Status is enabledLocal is enabled, Priority list is 3Oper status is internally propagatedPFC DCBX Oper status is UpState Machine Type is SymmetricTLV Tx Status is enabledPFC Link Delay 45556 pause quntamsApplication Priority TLV Parameters :--------------------------------------FCOE TLV Tx Status is enabledISCSI TLV Tx Status is disabledLocal FCOE PriorityMap is 0x8Local ISCSI PriorityMap is 0x0Remote FCOE PriorityMap is 0x8Remote ISCSI PriorityMap is 0x1011 Input TLV pkts, 28 Output TLV pkts, 5 Error pkts, 1202 Pause Txpkts, 0 Pause Rx pktsInterface TenGigabitEthernet 0/52Admin mode is onAdmin is enabledRemote is enabled, Priority list is 3Remote Willing Status is disabledLocal is enabled, Priority list is 3Oper status is recommendedPFC DCBX Oper status is UpState Machine Type is FeatureTLV Tx Status is enabledPFC Link Delay 45556 pause quntamsApplication Priority TLV Parameters :--------------------------------------FCOE TLV Tx Status is enabledLocal FCOE PriorityMap is 0x8Remote FCOE PriorityMap is 0x80 Input TLV pkts, 1 Output TLV pkts, 0 Error pkts, 0 Pause Tx pkts,12748 Pause Rx pkts
