Deploying FCoE (FIP Snooping) on Dell Force 10 MXL60Configuring the Cisco 5000 series switch with vPC and connections fromthe Dell Force10 MXL with FCoEvPC Configuration with FCoE linksFigure 50.Peer Keep-Alive Peer Keep-AliveCONSOLE33-3637-40LNK ACTLNK ACTForce10 MXL 10/40GbE41-4849-5610G SFP+ MODULELNK ACT10G SFP+ MODULELNK ACTCONSOLE33-3637-40LNK ACTLNK ACTForce10 MXL 10/40GbE41-4849-5610G SFP+ MODULELNK ACT10G SFP+ MODULELNK ACT3CISCO NEXUS N5548UPSTATID1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 321/10 GIGABIT ETHERNET 1/2/4/8G FIBRE CHANNEL1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16N55-M16UP3CISCO NEXUS N5548UPSTATID1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 321/10 GIGABIT ETHERNET 1/2/4/8G FIBRE CHANNEL1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16N55-M16UPManagement LANLAG/PortChannel LAG/PortChannelvPC Peer LinkNex5K-1 Nex5K-2MXL-1 MXL-2FCoE SAN AVSAN 2FCoE VLAN1000FCoE SAN BVSAN 3FCoE VLAN2000This figure illustrates the addition of FCoE links into the configuration. Much of the followinginformation will be centered on simply adding in these additional links into the configuration. Theexample is based on the previous steps in this scenario for the purposes of building in different steps.Note that the listed VSAN’s and VLAN’s to be used will be different on each side on the switch.
